 |
The multifunctional press Multimat - the ingenios combination for vacuum-formpressing and 3D-lamination
(photo "multimat.jpg") |
 |
Foil-laminated fronts
(photo "multimat_s1.jpg") |
 |
Veneered profiles
(photo "multimat_s2.jpg") |
 |
Form-veneered parts and veneered trims
(photo "multimat_s3.jpg") |
|
Operation Details "Foil-Lamination" |
 |
Apply glue to the workpieces
(photo "mu_fo_af1.jpg") |
 |
Insert workpieces in the Multimat unit and spread the foil sheets over them
(photo "mu_fo_af2.jpg") |
 |
The vacuum force presses the foil sheets onto the workpieces, the heat activates eht glue
(photo "mu_fo_af3.jpg") |
 |
Open the unis after the finished pressing cycle
(photo "mu_fo_af4.jpg") |
 |
Take out finished work pieces after the pressing cycle
(photo "mu_fo_af5.jpg") |
|
Operation Details "Layer-Gluing" |
 |
Apply glue to the individual layers
(photo "mu_sc_af1.jpg") |
 |
Attach the layers to the mould
(photo "mu_sc_af2.jpg") |
 |
Insert the worpieces into the Multimat unit
(photo "mu_sc_af3.jpg") |
 |
The vacuum forces presses the workpiece onto the mould
(photo "mu_sc_af4.jpg") |
 |
The finished pieces can be extracted
(photo "mu_sc_af5.jpg") |
|
Operation Details "Form-Veneering" |
 |
Apply glue to the veneer
(photo "mu_fu_af1.jpg") |
 |
Put the workpiece on the veneer
(photo "mu_fu_af2.jpg") |
 |
Spray the veneer with water
(photo "mu_fu_af3.jpg") |
 |
The workpiece is pressed in the Multimat unit
(photo "mu_fu_af4.jpg") |
 |
A finished veneered strip
(photo "mu_fu_af5.jpg") |
