Technical Data

Vacuum pouches:
Tear strength: 2900 N / 5 cm
thermic load: min. - 30 °C, max. + 80 °C

Standard value:

Reference layer thickness for HDF-R :100 (radius 400 mm layer thickness 4 mm)

Production capacity:

Form-gluing:
depending on the type of glue used: 1 – 8 hours per pressing
Form-veneering:
depending on the type of glue used: 15 min – 1 hour per pressing

Shorten cycle time – lower costs > COLUMBUS wood-glues

CHS urea resin glue – waterproof

• for waterproof veneering (hot and cold)
• especially suitable for cold gluing
• no resetting during layer-gluing (short setting time)
• water-based finish can be applied after 2 days
• operating range between 10 and 120 °C

Layer-gluing with VACUFLEX

Pressing temperature: ca. 25 °C
Pressing cycle duration: ca. 4 hours

Form-veneering with VACUFLEX

Pressing temperature: ca. 25 °C
Pressing cycle duration: ca. 3 hours