Technical Data
VACUFORM
(with tilting mechanism)
1 vacuum pump in combination with 1 vacuum tank
tank type: 200 litre steeltank
electric connection: 400 V, 3 Ph., 50 Hz,
vacuum pressure: 850 mb (8,5 to/m²)
initial suction force: 200 litre tank
for continuous use: "autocontrol" for automatic turning on-off of the pump
VACUFORM XL
(without tilting mechanism)
1 vacuum pump in combination with 1 vacuum tank
electric connection: 400 V, 3 Ph., 50 Hz
vacuum pressure: 850 mb (8,5 to/m²)
initial suction force: 200 litre tank
for continuous use: "autocontrol" for automatic turning on-off of the pump
Control panel:
1 vacuum meter, 1 vacuum-pressure stat ranging from 0 to maximal 850 mb
1 "autocontrol" differential pressure switch, fully adjustable,
1 lever for the evacuation process
Vacuum membrane
Construction: Fitted tightly into the main body frame
Material: highly elastic, robust, and long-lasting rubber membrane
Manual maximum load: 18 N/mm², 700 % ultimate elongation, extremely tightly sealed
Thermical load: min. -40 °C, max. +80 °C
VACUFORM can also be outfitted with a heat-resistant silicone membrane (max. 220 °C).
VACUFORM heating cover
1 aluminum cover insulated across the entire interior surface, fitted onto the membrane frame with hinges and quick release fasteners
1 air-circulation heater: 6/9 KW, 50/60 Hz
1 thermostat ranging from 0 - 70 °C
2 compression springs
Production capacity:
Depening on form, material, and glue, the pressing cycle times for vacuum layer-veneering range from 15 minutes to 6 hours; for vacuum form-veneering (depending on form and glue) from 10 - 30 minutes (with heating cover you can save up to 80% of time for layer-veneering, up to 60% of time for form-veneering
Equipment and Scope of Delivery
All types of the membrane press tables VACUFORM are equipped with:
- mobile vacuum construction
- 1 membrane frame with high elastic rubber (700 % extension)
- 1 clear control board in the construction integrated
- the whole equipment is maintenance-free
- electrical connection: 400 V, 3 Ph., 50 Hz
Sizes
VACUFORM with tilting mechanism
1 vacuum pump in combination with 1 vacuum tank
external dimensions
length: 3200 mm
width: 1550 mm
external "swing up"
length: 3200 mm
width: 850 mm
usable area
length: 2880 mm
width: 1270 mm
work height: 900 mm
HEATING TOP for VACUFORM
air circular heating: 6 KW, 50/60 Hz
adjustment about 0 – 70 °C
VACUFORM XL WITHOUT tilting mechanism
1 vacuum pump in combination with 1 vacuum tank
external dimensions
length: 4000 mm
width: 1810 mm
usable area
length: 3880 mm
width: 1540 mm
work height: 900 mm
HEATING TOP for VACUFORM XL
air circular heating: 9 KW, 50/60 Hz
adjustment about 0 – 70 °C
Special sizes on request.
Additional equipment:
Replacement membrane made of rubber or silicone
(Operating life depends entirely on the type of use the material is subjected to)
The units are largely maintenance-free! (clean the pumps' filters from time to time)
The technical data contained herein is subject to modifications.
