Technical Data
Material:
Yarn type: PES (Polyethersulfon)
Yarn weight: 1100 dtex
Coated fabric: rubber (neoprene)
Thickness: 0,9 mm
Warp tensile strength: 4000 N/5 cm (ISO 1421/1977)
Warp tear strength: ca. 1800 N (ISO 4674/1977)
Fill elongation at break: 25 % (ISO 1421/1977)
Thermal impact: min. - 30 °C, max. + 80 °C
Standard value:
Reference layer thickness for HDF-R :100 (radius 400 mm layer thickness 4 mm)
Production capacity:
Form-gluing:
depending on the type of glue used: 1 – 8 hours per pressing
Form-veneering:
depending on the type of glue used: 15 min – 1 hour per pressing
Equipment and Scope of Delivery
VACUFLEX consists of a vacuum pouch of various sizes, manufactured from a
highly durable polyester fabric that is rubberized on both sides. The
unit has a vacuum connection.
The included vacuum pump TF 8 (suction force 8 m³/hour) is ideal
for use with the unit. The unit is constructed for continuous use. (The
vacuum pump is turned on throughout the entire pressing process and
maintains a consistent vacuum inside the pouch)
VACUFLEX is delivered with a sealing rail (including sealing wedges) used to tightly close the open side of the pouch.
Sizes
VACUUM-PUMP TF 8
with 8 m³ suction force/hour
electric connection 230 V
80 % absolute vacuum
VACUFLEX 300
Effective useful surface
Length: 3000 mm
Width: 1300 mm
VACUFLEX 400
Effective useful surface
Length: 4000 mm
Width: 1300 mm
VACUFLEX 300 S
Effective useful surface
Length: 3000 mm
Width: 2000 mm
VACUFLEX 400 S
Effective useful surface
Length: 4000 mm
Width: 2000 mm
The vacuum pouches can be manufactured to fit your custom needs.
The units are maintenance-free.
The technical data contained hereing is subject to modification.
