Technical Data

• usable area: 2880 x 1280 mm
• table height: 900 mm
• colour: blue
• optional: wheels (swivel castors)

• 400 V, 3 phases, 50 Hz

rotary vane vacuum pump:
vacuum pressure: to max. 850 hPa (mbar) (8,5 t/m²)
nominal displacement: 16 m³/h

heating hood:
the heating hood is mounted on the membrane frame
3 tubular heating elements, total power 5,4 kW
thermostat with variable setting: 0 - 80 °C
opening with gas springs

control units in the table integrated:
vacuum gauge
control lever for the air evacuation
optional: vacuum pressure regulator (variable pressure setting)

membrane:
mounting method: airtight fitting in the membrane frame
material: high elastic, robust and hard wearing rubber membrane
elongation at tear: 700 %, tensile strength: 22 Mpa, hardness: 41 shore A
max. temperature: + 80 °C
optional: heat resistant silicone membrane temperature max. + 220 °C

pressing times:
vacuum laminated bending or forming: 15 min - 6 h, depending on the shape, material and adhesive
vacuum veneering: 10 - 30 min., depending on the shape and adhesive
with the heating hood are shorter pressing times possible

Equipment

VACUPLUS – Membrane Press,

overall dimensions incl. heating hood: ca. 3080 x 1500 x 1500 mm (l x w x h)

• stationary pressing table WITHOUT wheels
  usable area: ca. 2880 x 1280 mm
  table height: 900 mm
  

• rotary vane vacuum pump
  vacuum pressure to max. 850 hPa (mbar) (8,5 t/m²)
  nominal displacement: 16 m³/h
  

• rubber membrane
  max. temperature: + 80 °C
  tensile strength: 22 Mpa
  elongation at tear: 700 %
  

• heating hood (shorter pressing times through quick heating of the material)
  3 tubular heating elements, total power 5,4 kW
  thermostat with variable setting: 0 - 80 °C
  

• electrical connection: 400 V, 3 phases, 50 Hz

optional extras:

• vacuum pressure regulator (variable pressure setting)
• rotary vane vacuum pump 25, displacement 25 m³/h, for a faster air evacuation with large-scale forms
• wheels (swivel castors), for a mobile vacuplus in the workshop area
• heat resistant silicone membrane temperature max. + 220 °C instead of the rubber membrane
  

Sizes

external dimensions
length: 3080 mm
width: 1500 mm

usable area
length: 2880 mm
width: 1280 mm
work height: 900 mm

Additional equipment:

Replacement membrane made of rubber or silicone
(Operating life depends entirely on the type of use the material is subjected to)

The units are largely maintenance-free! (clean the pumps' filters from time to time)
The technical data contained herein is subject to modifications.