Technical Data

electric connection: 400 V, 3 Ph., 50 Hz,
vacuum pressure: 850 mb (8,5 to/m²)

Control panel:
1 vacuum meter, 1 vacuum-pressure stat ranging from 0 to maximal 850 mb
1 lever for the evacuation process

Vacuum membrane

Construction: Fitted tightly into the main body frame
Material: highly elastic, robust, and long-lasting rubber membrane
Manual maximum load: 18 N/mm², 700 % ultimate elongation, extremely tightly sealed
Thermical load: min. -40 °C, max. +80 °C

VACUFIX can also be outfitted with a heat-resistant silicone membrane (max. 220 °C).

Production capacity:

Depening on form, material, and glue, the pressing cycle times for vacuum layer-veneering range from 15 minutes to 6 hours; for vacuum form-veneering (depending on form and glue) from 10 - 30 minutes (with heating cover you can save up to 80% of time for layer-veneering, up to 60% of time for form-veneering

Equipment

stationary pressing table WITHOUT wheels

rotary vane vacuum pump VT 4.16

vacuum pressure to max. 850 hPa (mbar) (8,5 t/m²)

nominal displacement: 16 m³/h, with vacuum pressure valve

pressing frame with high elastic rubber membrane (700 % elongation)

max. temperature: +80 °C

electrical connection: 400 V, 3 phases, 50 cycles

VACUFIX Standard:

overall dimensions: ca. 2650 x 1500 mm

usable area: ca. 2500 x 1320 mm

VACUFIX XL:

overall dimensions: ca. 3000 x 1500 mm

usable area: ca. 2880 x 1320 mm

Additional Equipment

100 liter vacuum pressure tank
Rotary vane vacuum pump VT 4.25, displacement 25 m³/h (instead of VT 4.16) for a faster air evacuation with large-scale forms
Wheels (swivel castors), for a mobile VACUFIX in the workshop area
Heat resistant silicone membrane temperature max. +220 °C, instead of the rubber membrane
Protection cover for the membrane (made of felt), size: ca. 2000 x 1000 mm, usable up to 80 °C