Tiefziehen_Slider.jpg
vacuum1.jpg
vacuum2.jpg
vacuum4.jpg
  • Performer
    Performer
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Combitherm
    Combitherm
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Combimat
    Combimat
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Vacuform
    Vacuform
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Vacuplus
    Vacuplus
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Vacufix
    Vacufix
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Multimat
    Multimat
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Ecomat
    Ecomat
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Profitherm
    Profitherm
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Vacuflex
    Vacuflex
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Vacustar
    Vacustar
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Vacucaddy
    Vacucaddy

Performer in Action:


Heating and forming of thermoforming materials:

  • place the thermoforming material on the pulled out working surface
  • after the set heating time has finished remove the hot thermoforming material and
  • place it on the prepared mould in the vacuum press
  • pressing time according to the forming parameters of the thermoforming material
  • remove the ready formed work piece after finishing the pressing process

Laminating and veneering of shaped parts:

  • set the desired temperature for the heating hood, open the membrane frame and place the work piece onto the machine table
  • switch the vacuum pump on – the pressing process starts
  • open the membrane frame after end of pressing time and remove the ready work piece

3D foil laminating:

  • pre-heat the machine to reach operation temperature
  • place the work pieces together with the distance boards onto the working table
  • place the 3D-foil over the machine table and close the heating hood
  • start the automatic foil laminating process
  • after the foil laminating process is finished, open the heating hood and remove the ready laminated work pieces

Get Prices

We guarantuee that your input data will be treated confidentially, and that it will not be shared with third parties. With sending off the form, you agree that we save and use your personal details.
All requested information is provided free of charge, and does not oblige you to make a purchase.
Logo Austria