01.jpg
  • Performer
    Performer
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Combitherm
    Combitherm
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Combimat
    Combimat
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Vacuform
    Vacuform
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Vacuplus
    Vacuplus
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Vacufix
    Vacufix
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Multimat
    Multimat
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Ecomat
    Ecomat
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Profitherm
    Profitherm
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Vacuflex
    Vacuflex
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Vacustar
    Vacustar
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
vacuform3.png

Technical Data


VACUFORM (with tilting mechanism)

1 vacuum pump in combination with 1 vacuum tank
tank type: 200 litre steeltank
electric connection: 400 V, 3 Ph., 50 Hz,
vacuum pressure: 900 hPa (9 t/m²)
initial suction force: 200 litre tank
for continuous use: 'autocontrol' for automatic turning on-off of the pump


VACUFORM XL (without tilting mechanism)

1 vacuum pump in combination with 1 vacuum tank
electric connection: 400 V, 3 Ph., 50 Hz
vacuum pressure: 900 hPa (9 t/m²)
initial suction force: 200 litre tank
for continuous use: 'autocontrol' for automatic turning on-off of the pump


Control panel:

1 vacuum meter, 1 vacuum-pressure stat ranging from 0 to maximal 900 hPa
1 'autocontrol' differential pressure switch, fully adjustable,
1 lever for the evacuation process


Vacuum membrane

Construction: Fitted tightly into the main body frame
Material: highly elastic, robust, and long-lasting rubber membrane
Manual maximum load: 18 N/mm², 700 % ultimate elongation, extremely tightly sealed
Thermical load: min. -40 °C, max. +130 °C

VACUFORM can also be outfitted with a heat-resistant silicone membrane (max. 220 °C).


VACUFORM heating cover

1 aluminum cover insulated across the entire interior surface, fitted onto the membrane frame with hinges and quick release fasteners
1 air-circulation heater: 6/9 kW, 50/60 Hz
1 thermostat ranging from 0 - 70 °C
2 compression springs


Production capacity:

Depening on form, material, and glue, the pressing cycle times for vacuum layer-veneering range from 15 minutes to 6 hours; for vacuum form-veneering (depending on form and glue) from 10 - 30 minutes (with heating cover you can save up to 80% of time for layer-veneering, up to 60% of time for form-veneering


Equipment and Scope of Delivery


All types of the membrane press tables VACUFORM are equipped with:

  • mobile vacuum construction
  • 1 membrane frame with high elastic rubber (700 % extension)
  • 1 clear control board in the construction integrated
  • the whole equipment is maintenance-free
  • electrical connection: 400 V, 3 Ph., 50 Hz

Sizes


VACUFORM with tilting mechanism

1 vacuum pump in combination with 1 vacuum tank


external dimensions
length: 3200 mm
width: 1550 mm


external 'swing up'
length: ca. 3200 mm
width: ca. 850 mm


size inside frame
length: ca. 2920 mm
width: ca. 1320 mm


HEATING TOP for VACUFORM

air circular heating: 6 KW, 50/60 Hz
adjustment about 0 – 70 °C


VACUFORM XL WITHOUT tilting mechanism

1 vacuum pump in combination with 1 vacuum tank


external dimensions
length: ca. 4100 mm
width: ca. 1850 mm


size inside frame
length: ca. 3880 mm
width: ca. 1540 mm


HEATING TOP for VACUFORM XL

air circular heating: 9 kW, 50/60 Hz
adjustment about 0 – 70 °C


Special sizes on request

 


Additional equipment:

Replacement membrane made of rubber or silicone
(Operating life depends entirely on the type of use the material is subjected to)


The units are largely maintenance-free! (clean the pumps' filters from time to time)
The technical data contained herein is subject to modifications.

Get Prices

We guarantuee that your input data will be treated confidentially, and that it will not be shared with third parties. With sending off the form, you agree that we save and use your personal details.
All requested information is provided free of charge, and does not oblige you to make a purchase.
Logo Austria