01.jpg
  • Performer
    Performer
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Combitherm
    Combitherm
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Combimat
    Combimat
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Vacuform
    Vacuform
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Vacuplus
    Vacuplus
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Vacufix
    Vacufix
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Multimat
    Multimat
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Ecomat
    Ecomat
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Profitherm
    Profitherm
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Vacuflex
    Vacuflex
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Vacustar
    Vacustar
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
multimat3.png

Technical Data


MULTIMAT - 3D - Foil Vacuum Press

1 vacuum pump, nominal displacement 40 m³/h
vacuum pressure: max. 900 hPa (9 t/m²)

Extendable Control Panel:

The controls available vary in accordance with different MULTIMAT models

Vacuum Membrane:

Construction: vacuum-sealed inside the membrane frame
Material: highly elastic, robust, and durable silicon membrane
Manual stress: 18 N/mm², 700 % elongation at break point, highly wear-resistant
Thermal stress: -40 °C to maximal +220 °C

Heating cover:

1 aluminum cover (entire surface is insulated), attached to the membrane frame with swivels, includes interior lighting
1 circulating air heating system (electrical connection: 12 KW, 400 V, 50/60 Hz)
1 thermostat, seamlessly adjustable between 0 and 140 °C
2 pressure springs


Fully automatic process control unit

Optional settings:
  • Adjusting the pre-heating temperature
  • Adjusting the heating period
  • Adjusting duration of the vacuum pressing cycle
  • Adjusting duration of the vacuum cooling cycle

The fully automatic process control unit enables you to adjust the pre-heating temperature, the duration of the vacuum pressing cycle, and the duration of the vacuum cooling cycle.

Once the automatic process is initiated, the selected pre-heating time starts to count-down. After reaching the selected temperature, the vacuum pressing cycle is initiated automatically. Once the pressing cycle is completed, the heating cover is lifted automatically, so that the cooling cycle can commence. When the cooling cycle is completed, the vacuum pump is automatically turned off.

Closing of the heating cover is controlled by pushing the corresponding button. It opens automatically after the pressing cycle is completed. The pneumatic lifting and lowering of the membrane frame is controlled manually through the touch of a button.

The fully automatic process control unit makes use of a SPS control system with and includes an operating display.


Production capacity:

3D-foil lamination: approximately 5 – 10 minutes, depending on number of inserted work pieces (requires heating cover)
Vacuum layer-gluing: 15 minutes to 6 hours, depending on shape of the work piece and material/glue used
Vacuum form-veneering: between 10 and 30 minutes, depending on shape and type of glue used
(if the heating cover is used, the pressing cycle for layer-gluing can be shortened by up to 80%, the pressing cycle for form-veneering by up to 60%)

Equipment and Scope of Delivery


MULTIMAT – 3D-Foil Vacuum Press

  • Movable table with pneumatically swivel-mounted heating cover and foil-fixation sealing-frame
  • High performance rotary vane pump VT 4.40, nominal displacement: 40 m³/h, vacuum pressure to max. 900 hPa (9 t/m²)
  • Foil-fixation sealing-frame mounted on a pneumatic swivel 
  • including highly elastic silicone membran (transparent)
  • Aluminum heating cover, entire surface insulated, variable adjustment 0 to 140 °C
  • The entire unit is maintenance-free, the vacuum pump requires regular servicing
  • Electrical power connection (including heating cover): 14 kW, 400 V, 50/60 Hz

Sizes


External dimensions: ca. 3200 mm x 1600 mm
Size inside frame: ca.  2880 mm x 1280 mm
Work height: 900 mm

Get Prices

We guarantuee that your input data will be treated confidentially, and that it will not be shared with third parties. With sending off the form, you agree that we save and use your personal details.
All requested information is provided free of charge, and does not oblige you to make a purchase.
Logo Austria