faq.jpg
  • Performer
    Performer
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Combitherm
    Combitherm
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Combimat
    Combimat
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Vacuform
    Vacuform
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Vacuplus
    Vacuplus
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Vacufix
    Vacufix
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Multimat
    Multimat
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Ecomat
    Ecomat
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Profitherm
    Profitherm
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Vacuflex
    Vacuflex
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Vacustar
    Vacustar
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Vacucaddy
    Vacucaddy

Frequently Asked Questions


What is the highest temperature that the membrane can withstand?

The standard membrane can be heated up to 70 °C. We can provide a special membrane made of silicon, however, which can be heated up to 220 °C.


Is the material resistant to solvents?
No, it is recommended not to expose the membrane to solvents.


Does the membrane have to be kept out of direct sunlight (UV rays)?
Yes, too much direct sunlight can make the membrane brittle.


Is it possible to replace a damaged membrane?
Yes. You can replace the membrane yourself, or it can be done in our workshop.


What is the operating life of a membrane?
Under normal conditions, its operating life is approximately 4 - 6 years (the membrane should be protected from pointy tips and edges).


Is it possible to manufacture large work pieces using VACUPLUS?
Basically, the effective useful surface is 2900 mm by 1300 mm. Depending on its height, the entire volume of the work piece (height - width - height) has to be taken into consideration.


Is it possible to heat the work pieces during the pressing cycle?
Yes, by using an additional heating cover, it is possible to heat up the work pieces. This drastically shortens the duration of the pressing cycle!

Get Prices

We guarantuee that your input data will be treated confidentially, and that it will not be shared with third parties. With sending off the form, you agree that we save and use your personal details.
All requested information is provided free of charge, and does not oblige you to make a purchase.
Logo Austria