01.jpg
  • Performer
    Performer
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Combitherm
    Combitherm
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Combimat
    Combimat
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Vacuplus
    Vacuplus
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Vacuform
    Vacuform
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Vacufix
    Vacufix
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Multimat
    Multimat
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Ecomat
    Ecomat
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Profitherm
    Profitherm
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Vacuflex
    Vacuflex
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Vacustar
    Vacustar
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
Lamentablemente aún no disponemos de esta página en su idioma!
Pero es posible leerla en las idiomas siguientes:
alemán, inglés, ruso

Technical Data


Cover: 

  • Transparent
  • Material: PVC crystal clear
  • Thickness: 0,50 mm
  • Tensile strength: ca. 200 kg/cm² (ASTM D882, Methode A)
  • Fill elongation at break: ca. 230 % (ASTM D882, Methode A)
  • Warp tensile strength: 6 kg/mm (ASTM D1004)

Basement: 

  • Dark blue
  • Material: Polyester-Trägergewebe
  • Yarn weight: 1100 dtex
  • Warp tensile strength: 3000 N/5 cm (DIN 53354)
  • Warp tear strength: 300 N (DIN 53363)

Standard value:

Reference layer thickness for HDF-R : 100 (radius 400 mm layer thickness 4 mm)

Production capacity:

Form-gluing: depending on the type of glue used: 1 - 8 hours per pressing
Form-veneering: depending on the type of glue used: 15 min - 1 hour per pressing



Equipment and Scope of Delivery


VACUSTAR for form-veneering and form-coating:
  • vacuum bag, 3 side weld together (short side open)
  • together with vacuum pump with 8 m³/hr suction capacity (230 V, 90 % end vacuum)
  • wooden track and clamps from the own workshop

VACUSTAR bag size: 3000 x 1300 mm

Solicitar tarifas

Es evidente que  tratamos sus datos confidencialmente y que los transmitimos solamente a nuestras empresas asociadas, en caso de que tengamos una en su país. Si envian  el formulario se declaran de acuerdo con el almacenamiento y proceso de sus  datos personales.

Por supuesto, todas las informaciones pedidas son gratuitas y sin obligación.

Logo Austria