vacuum1.jpg
vacuum2.jpg
vacuum3.jpg
vacuum4.jpg
  • Performer
    Performer
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Combitherm
    Combitherm
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Combimat
    Combimat
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Vacuplus
    Vacuplus
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Vacuform
    Vacuform
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Vacufix
    Vacufix
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Multimat
    Multimat
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Ecomat
    Ecomat
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Profitherm
    Profitherm
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Vacuflex
    Vacuflex
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Vacustar
    Vacustar
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC

It's that easy…


Heating and forming of thermoforming materials:

  • place the thermoforming material on the pulled out working surface
  • after the set heating time has finished remove the hot thermoforming material and
  • place it on the prepared mould in the vacuum press
  • pressing time according to the forming parameters of the thermoforming material
  • remove the ready formed work piece after finishing the pressing process

Laminating and veneering of shaped parts:

  • set the desired temperature for the heating hood, open the membrane frame and place the work piece onto the machine table
  • switch the vacuum pump on – the pressing process starts
  • open the membrane frame after end of pressing time and remove the ready work piece

3D foil laminating:

  • pre-heat the machine to reach operation temperature
  • place the work pieces together with the distance boards onto the working table
  • place the 3D-foil over the machine table and close the heating hood
  • start the automatic foil laminating process
  • after the foil laminating process is finished, open the heating hood and remove the ready laminated work pieces

Solicitar tarifas

Es evidente que  tratamos sus datos confidencialmente y que los transmitimos solamente a nuestras empresas asociadas, en caso de que tengamos una en su país. Si envian  el formulario se declaran de acuerdo con el almacenamiento y proceso de sus  datos personales.

Por supuesto, todas las informaciones pedidas son gratuitas y sin obligación.

Logo Austria