vacuum1.jpg
vacuum2.jpg
vacuum3.jpg
vacuum4.jpg
  • Промышленность
    Промышленность
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Комбитерм
    Комбитерм
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Комбимат
    Комбимат
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Вакуплюс
    Вакуплюс
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Вакуформ
    Вакуформ
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Вакуфикс
    Вакуфикс
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Мультимат
    Мультимат
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Экомат
    Экомат
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Профитерм
    Профитерм
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Вакуфлекс
    Вакуфлекс
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC
  • Вакустар
    Вакустар
    Wood and materials such as
    Thermoplastic materials
    3D-foil laminating of PVC

It's that easy…


Heating and forming of thermoforming materials:

  • place the thermoforming material on the pulled out working surface
  • after the set heating time has finished remove the hot thermoforming material and
  • place it on the prepared mould in the vacuum press
  • pressing time according to the forming parameters of the thermoforming material
  • remove the ready formed work piece after finishing the pressing process

Laminating and veneering of shaped parts:

  • set the desired temperature for the heating hood, open the membrane frame and place the work piece onto the machine table
  • switch the vacuum pump on – the pressing process starts
  • open the membrane frame after end of pressing time and remove the ready work piece

3D foil laminating:

  • pre-heat the machine to reach operation temperature
  • place the work pieces together with the distance boards onto the working table
  • place the 3D-foil over the machine table and close the heating hood
  • start the automatic foil laminating process
  • after the foil laminating process is finished, open the heating hood and remove the ready laminated work pieces

Запросите цену

Разумеется, Ваши данные будут конфиденциальны, и мы передадим их только нашим партнёрам по сбыту; в том случае, если таковой имеется в вашей стране. Вся запрошенная информация является бесплатной и ни к чему не обязывает. Убедительно просим писать нам на немецком или английском языках.
Logo Austria